tigerpaper4

Door Handle Replacement It's worth it to replace door handles if you don't like the way they appear, or if they are difficult to use. Installing a new door handle is simple if you've got patience. Modern door handles are equipped with cover plates that hide the screws to give them a beautiful appearance. However, you will need to attach them separately if the new handle does not have them attached already. Remove the Old Handle Door handles are not only important for their aesthetic value to your home, but they're also crucial for safety as they let you lock and unlock your door. As time passes, the door handle may start to lose its grip or feel a bit loose. It could also begin to look aged and worn. This is a good indication that it's time to replace the door handle. If your door handle is becoming difficult to use, it might be time to replace it. This is a serious issue because you won't be capable of locking or unlocking the door which could put your family and yourself at risk. Another reason to replace your door handle is if it's damaged or broken. A damaged or broken door handle can be dangerous, especially for children and elderly family members who may struggle to open it. They could be trapped. Luckily, it's quite simple to fix a damaged door handle by simply replacing the handle that was broken. Modern door handles are usually standard sizes and should be able to fit any door. If you're not certain that the new door handle you are buying will work, remove the old one and measure the holes in its housing. This will allow you to purchase the right size door handle. It is easiest to take off the old door handle by taking it off from the door. This is typically done with the screw driver. Some door handles have the cover plate, which conceals the screws that mount them. You will need to remove this to get to the screws. Once you have removed the old handle, take an outline of how the spindle is connected so that you can be sure to align it when you install your new one. You can also remove the door handle by depressing the latch mechanism. You can use a screwdriver for removing the door handle. However, you will need to locate the small latch which is located on the edge cut piece. After you have removed the latch, take off the handle and strike plate. Then, you can remove the latch from the door's edge. Remove the Strike Plate When you replace the handle, you'll be required to replace the latch plate that holds the hole that the door's latch hooks into when it closes. The package the new handles arrive in will have two different latch plates: a rectangular one and circular (see the above diagram that outlines the components of a door handle). If your current latch plate has rectangular, swap it over to the round one, so that the latch hooks onto the strike plate in a manner that makes the handle more comfortable to use. The first step is to take off the screw that is holding the latch plate. These screws are often tight and will require some force to loosen. If you can, it might be beneficial to have another person help with this process. door handles repairmywindowsanddoors should lift itself out of the door once the screws have been removed. If the latch plate is stuck or refuses to move, use a small file to scrape the edges. This can sometimes free up the plate. Now you can move on to creating the new door strike plate to be installed. With the wood screws that were included with your new handles, screw the latch plate onto the inside of the doorjamb. Do not tighten the screws too much as this can damage the strike plate. If you are not sure whether the latch plate is in the proper position, shut and then open the door to see whether it locks and closes correctly. If not, you'll need to adjust the strike plate up or down, or even forward or back until the door shuts and latches properly. If the door still moves or jiggles, then you may need to increase the size of your latch hole on the strike plate. This is more prevalent on older doors. It could be caused by wear and tear, hinges that are too narrow, the wrong size latch, or a damaged strike plate. If this is the case, use a metal filing instead of a chisel, or hammer to adjust the strike plate. Removing the Latch The latch is the angled metal piece that moves through the hole on the inside edge of your door. The latch is moved forward when you turn the handle. It also hooks into an opening in the door frame to keep the door shut. If your door shakes when you close it, an upgrade to the latch could be all that is needed to correct the issue. The screws that secure the door latch are hard to spot, but you can usually use a screwdriver to make an insignificant hole on the trim plate and pry the latch off. After taking off the trim plate you should be able to take off the latch as well as the bolts that hold it, as well as the spindle in position. If the latch doesn't easily be released you can try using an old-fashioned paper clip or tool to spring it loose from the handle mechanism. Insert the item in the recessed latch slot and then gently twist or jiggle until you feel handle and latch begin to split. It is possible repeat this process a few times before you are able to remove the latch. After the old latch has been removed and the old latch is removed, you should be able to move the new latch into the slot with no problems. Use your new screws to attach the latch to the strike plate or door frame. Make sure it's correctly positioned in the slot, and aligned with the screw chambers. Before you install the new handle, be certain to measure your existing backset (the distance from the center of the big hole on the front of the door to the edge). Verify that the size of the latch of the new handle matches the measurement. You'll require a brand new cylinder for your lock if replacing the latch and handle, or your old one is damaged. If you're not changing the locks, the new latch will fit into your existing recess and will work with the keys you have currently. Pick a latch that has rectangular cover plates to match your old handles. Then remove the Cover Plate You can replace your old door handles with a new rose and lever designs to enhance the appearance of your house. You can purchase complete sets with matching escutcheons, privacy adaptors and escutcheons. The first step to replace an internal door handle is to remove the cover plate or rose, which covers the screws and inner mechanism. Find an opening tab on the plate, and employ a flathead screwdriver lift it off the knob. It may have an opening on one edge or be secured by a pin. Remove the screw that is holding the handle inside and set it aside once the cover plate has been removed. You'll also want to take out the screws that hold the latch and the plates inside, which you can do by loosening them using the help of a Philips screwdriver. Then, take the inner plates and latch plate from the door and put them aside. Not all doors have this gap. If yours doesn't have a handle, you'll need to make a hole in the door to install the new handle. This is the same procedure as opening a door locked however you'll have to be extra cautious not to harm the frame or door. After drilling the holes after which you'll have to put in new screws for the door knob. Buy the same size as the old screws to ensure that you don't get the handle that is too loose or tight. Installing a new latch and strike rod is also necessary. These are not included in all door handle sets. If you're looking for a quality replacement set of interior door handles look no further than the Amazon's Choice FAERSI two-piece chrome-finished handle set. It's a factory fit and has received hundreds of 5-star reviews from happy customers. It's a great option to replace damaged or worn door handle hardware inside your Chevy HHR.